Inspection
- Starting the inspection
- Inspection screen
  In the inspection screen the user can switch between different views to monitor and/or adjust the actual inspection. The general user interface layout can be divided into 5 parts.
- Inspection tabs
- Statistics
- EyeC ProofRunner buttons and shortcuts
  The following buttons and menu items are relevant for the inspection process. When applicable, corresponding shortcuts are listed.
- Using the Toggle button
- Machine animation
- Inspection process
  - Learning phase of the inspection process
  - Selecting suspicious areas
  - Handling serial defects
  - Reteaching a new reference
  - Tracking of operator intervention during inspection
    Some of the buttons in the inspection screen are used to track the operator’s intervention during inspection. If 1 of the following buttons is used during inspection, this action will be tracked in the inspection report.
  - Stopping and restarting the machine
  - Pausing and resuming the inspection
- Recording actions for the inspection report
- Ending the inspection and creating a report

Handling serial defects

For handling serial defects, choose 1 of the following options:

Readjust the inspection mask manually as described in Editing the inspection mask.
Readapt the reference image (golden image) to the current repeat by clicking on the Readapt button.
Activate the automatic serial defect detection in the inspection settings (Inspection settings > Serial defect detection).

Similar deviations from the original reference image (golden image) are no longer marked as suspicious areas.