If a suspicious area is found during the inspection, the rewinder is automatically
stopped. The defective section can now be cut out of the web.
-
Cut the web at the desired first position.
-
To include this process in the report, click the Cut defect button.
-
Rethread the roll back into the rewinder.
-
To fast-forward to the second cut position on the web, click the Run
button.
-
To stop the rewinder, click Stop.
-
Cut the web at the desired second position.
-
Splice the web.
-
To include this process in the report, click the Cut defect button.
You can now restart the inspection.
