Comparing the reference sheet with the printed results
Note:
You can edit the inspection parameters in a way that only
serial defects are displayed. For information on how to edit the parameter settings,
see EyeC ProofRunner Sheetfed System Manual or EyeC ProofRunner Sheetfed
iX System Manual.
| NOTICE | |
|---|---|
Too many sheets in the waiting queue
Not all suspicious areas found
If there are too many sheets in the waiting queue, the message "Reduce
speed" is displayed at the bottom of the screen. In this case, the print speed
must be reduced immediately or the inspection parameters must be adjusted. Only
if both parameters are correct, the printing inspection works
correctly.
| |
| NOTICE | |
|---|---|
Reduced quality check by Operator
The EyeC ProofRunner system does not interfere in the control of the
print process. The responsibility for the assurance of quality lies with the
Operator of the print machine.
| |
- As soon as the EyeC ProofRunner software receives the Good Sheet Counter ON signal, it automatically starts the production printing inspection.
- The currently found suspicious areas are displayed during the printing process. The Operator is thus informed of the quality of the printing process at all times.
- If the quality is good throughout the entire printing process, the software continues to operate without interaction until the Operator finishes the printing process.