Reteaching a new reference

It is possible to replace the reference carton that was captured as a part of the job setup with a currently inspected carton during the inspection. You can only choose a carton that is displayed on the Live view or on the Flawed repeat view.

It is also possible to qualify the choosen carton using the digital template (PDF) that was used for job setup to ensure that the carton is flawless.

  1. To set up a new reference, click Use as master in the inspection area.

    Use as master

    Figure 1. Pull-down in Live view or Flawed repeat view
  2. After pressing the Use as master button, you are asked to qualify the carton before replacing the master reference.

    Dialog for qualifying item

    Figure 2. Dialog for qualifying the carton
  3. Once the qualification is finished, you can create a qualification report or cancel the replacement (for example, because the carton is defective).
  4. If qualification is mandatory or not enabled, you are only asked to confirm the replacement.
  5. You can also compare the selected carton to the digital template without using it as a new reference by clicking the Compare to PDF button.