Work on electrical equipment

WARNING

Danger to life due to electric shock!

Damaged electrical cables or other live parts may cause death or serious violations due to electric shock. Furthermore the functionality of the product may be compromised.

Repair work must only be done by a fully qualified electrician.
Damaged electrical cables have to be replaced immediately.
Loose connections have to be refastened.

Before connecting the system or any of its components to an electrical outlet, make sure that the following requirements are met:

Make sure the voltage most closely matches the AC power available in your location.
Make sure sufficient surge protection is provided.
Make sure your power outlet provides sufficient amperage.

To help avoid the potential hazard of electric shock, do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during a storm.

Ensure that nothing rests on any of your system’s cables and that the cables are not located where they can be stepped on or tripped over.

Be careful when connecting any kind of cable. The plug can be connected in a wrong way which could cause irreparable damages in the system. Moreover, there is a danger of electric shocks or fire.

The delivered circuit diagram must be observed.

Before connecting the PC to an electrical outlet, ensure that the operating voltage of the power adapter matches the rated voltage and frequency of the available power source.

To avoid electrical shock, the power cord should always be connected to a properly grounded outlet. The cables may be equipped with protective contact plugs to ensure proper grounding. No type of adapter plug is allowed to be used. The ground contact of the power cord must not be removed. Only appropriate extension cords are allowed to be used, which are suitable for the power adapter cable.

Electrical equipment must be inspected regularly. Please refer to the user manuals of the particular components for more details.